C Spire Wireless APN Internet Settings for iPhone and Android Devices

C Spire Wireless offers its mobile broadband services in three states; Tennessee, Mississippi, and Florida. Once you have your SIM installed in your phone or smart device and an active C Spire Wireless data plan, you will need to configure internet settings for it to connect to the internet. You will need APN settings specific to C Spire Wireless. APN, Access Point Name, is the name of a gateway between a GSM, GPRS, 3G, 4G, or 5G mobile network and another computer network.

Once you have the appropriate settings on your device, save them, and use the newly added setting for Android phones. Also, ensure that you are within network coverage and with an active data plan in order to connect to the internet. For some unique instances where the SIM appears not to be installed, you can follow the steps.

C Spire Wireless uses Verizon Wireless network infrastructure to offer its wireless service.

C Spire Wireless APN Internet Settings for iPhone

If you would like to set up APN settings for your iPhone or iPad with SIM capability, go to Settings > Cellular > Cellular Data Network then input the APN settings below specific to C Spire Wireless.

APN: internet.cs4glte.com
Username: (Leave this blank)
Password: (Leave this blank)

Leave Username and password blank.

Set up C Spire Wireless MMS to send and receive MMS messages then restart your iPhone.

You can also easily find your SIM application on your iPhone if you are missing them.

C Spire Wireless APN Internet Settings for Android Devices

For Android devices: Samsung, Oppo, LG, OnePlus, and the likes, navigate to Settings > Connections > Mobile Networks > Access Point Names for Samsung devices and Settings > Network & Internet > SIMs > Select SIM > Access Point Names for other Android devices then tap on Add New. You might not always find these settings here so the best location to look for is under Wireless and Internet or under Mobile Networks. Different versions of Android have these settings located differently. Input the APN settings below for C Spire Wireless:

Name: C Spire Wireless
APN: internet.cs4glte.com
Username: (Not set – Leave it blank)
Password: (Not set – Leave it blank)
Proxy : (leave it blank – not set )
Port : (Leave it blank – not set)
Server : (leave it blank )
MMSC: http://pix.cspire.com/servlets/mms
Multimedia Message Proxy: 66.175.144.91
Multimedia message port: 80
MCC: 311
MNC: 230
Authentication type : (none)
APN type : default,mms,supl
APN protocol : IPv4
APN roaming protocol : IPv4
Bearer : (Unspecified)
Mobile virtual network operator : (none )

Once you have inputted these settings, save then select C Spire as the APN to be used. You may need to restart your device for these settings to be applied.

C Spire Wireless Automatic Network Setting

By default, C Spire Wireless does not need network configurations. Some phones however require you to input C Spire Wireless network configuration.

On an iPhone, reset network configuration by navigating to Settings > General >Transfer or Reset iPhone > Reset > Reset Network Settings then restart your iPhone.

On Android, navigate to Settings > System > Reset Options > Reset Wi-Fi, mobile and Bluetooth >Reset settings then restart your Android device.

Alternatively, you can remove your SIM, delete APN profiles, restart your phone, and insert the SIM into your phone. Install APN profile then restart your device.