Every mobile internet service like QLink Wireless requires an Access Point Name (APN) settings to connect to the internet through a 4G LTE or 5G network. They are unique to each service provider. QLink Wireless APN Internet Settings for iPhone and Android devices are listed below.
To be in a position to connect to the internet successfully, ensure that you are within network coverage. Set your device to automatically select the available network so you do not lose connection. Also, ensure that you have an active Q Link Wireless data plan.
QLink Wireless APN Internet Settings for iPhone
To set up QLink Wireless APN Internet Settings on an iPhone, go to Settings > Cellular > Cellular Data Network then input the following settings.
- APN: qlink
- Username: (Leave this blank)
- Password: (Leave this blank)
Restart your device for the settings to take effect.
You can alternatively use wholesale or internet as your APN if the one listed above does not work for you.
Set up QLink MMS settings to send and receive MMS messages on your QLink iPhone.
You can also block spam calls and messages or use fast and free VPNs to secure your internet connection and more.
QLink Wireless MMS Settings for iPhone
To configure QLink MMS manually, navigate to Settings > Cellular > Cellular Data Network then input the settings below under the MMS section.
- APN: qlink
- Username: (leave this blank)
- Password: (leave this blank)
- MMSC: http://wholesale.mmsmvno.com/mms/wapenc
- MMS Proxy: (leave this blank)
- MMS Max Message Size: 1048576
- MMS UA Prof URL: www.apple.com/mms/uaprof.rdf
Save then set up QLink APN internet settings as the two work hand in hand. Restart your iPhone.
QLink Wireless APN Internet Settings for Android Devices
For Android devices, go to Settings > Connections > Mobile Networks > Access Point Names then tap on + to add new Access Point Name and input the settings below.
- Name: QLink APN
- APN: qlink
- Username: (Not set – Leave it blank)
- Password: (Not set – Leave it blank)
- Proxy: (leave it blank – not set )
- Port: (Leave it blank – not set)
- Server: (leave it blank )
- MMSC: http://wholesale.mmsmvno.com/mms/wapenc
- MMS Proxy: (leave blank)
- MMS Port: (Not Set)
- MCC: 310
- MNC: 240
- Authentication type: (none)
- APN type: default,supl,mms
- APN protocol: IPv4/IPv6
- APN roaming protocol: IPv4
- APN enable/disable: enabled
- Bearer: (Unspecified)
- Mobile virtual network operator: (none )
If 240 MNC doesn’t work, use 260 and internet instead of qlink APN.
Save the newly added QLink APN Settings then select QLink APN as the active APN. Restart your device if the settings do not take effect immediately.
You can also set up QLink MMS on your device so you can send and receive MMS messages.
QLink Wireless is a free ACP Government-funded phone service that uses T-Mobile‘s infrastructure.
QLink Wireless MMS Settings for Android Devices
QLink Wireless MMS for Android is set together on the same page as APN. Set up Q Link APN internet settings to also set up QLink MMS on your Android device.
To successfully send and receive MMS messages on Android, ensure that the APN, MMSC, and APN Type are set up appropriately. These are the settings that are responsible for sending and receiving MMS messages on Android, unlike an iPhone where they are explicitly set up.
QLink Wireless Automatic Network Configuration on iPhone and Android devices
Allow your iPhone to automatically configure QLink Wireless APN and MMS settings by resettings network settings. To reset network settings on your iPhone, navigate to Settings > General >Transfer or Reset iPhone > Reset > Reset Network Settings then input your passcode. Your iPhone should automatically configure QLink Wireless network settings.
On an Android device, reset network configuration by navigating to Settings > System > Reset Options > Reset Wi-Fi, mobile and Bluetooth >Reset settings then reset network settings. You can also reset network settings on Android devices by deleting APN settings and then restart your device without a SIM. Insert the SIM once more then restart your device.
QLInk Wireless Customer Service
QLink Wireless customer service contact information. Available on Monday to Friday from 8 AM to 8 PM EST, Saturday and Sunday from 9 AM to 6 PM EST.
- Call: 1-855-754-6543
- Email: [email protected]
- Fax: 1-855-837-5465
- Twitter: @QLinkWireless
- Facebook: Q Link Wireless
- Website: qlinkwireless.com
it didnt work for me? please help? thanks in advance
It should work, Also ensure that you are within network coverage.
this does not work on my galaxy j2?
It works, input the APN for QLink Wireless for Galaxy J2 under Settings > Connections > Mobile Networks > Access Point Names. Also, set your device to automatically select the available network.
I have set everything up exactly like it shows and done the reset like it says to and it’s still not working. It comes up like it’s going to then after about 5 seconds it disappears and it says emergency calls only. What am I doing wrong. Can someone please tell me
Hi, it appears you are in an area with limited network coverage. Set automatic network selection.
Cannot get more than one cellular bar on my iphone 11 in my home. Walk outside to the end of my driveway and receive 3-4 bars and under -100 dbn. What can i do to increase my signal other than dropping $$$$ for a booster.
Thanks in advance….
My email is [email protected].. I have 5 bars great signal.. sim card for qlink it’s registered.. but can’t make or receive calls
Hello, please email AirTalk customer service at [email protected].
Thank you so much Vincent. I had absolutely no idea why my phone world only work more and then but NEVER FROM HOME! Uuuuug! I thought I was going to go bizark!
Know that you are greatly appreciate!
Linda Cowher
Pennsylvania